I have a HP 6910p running 64-bit Windows 7 Professional. I recently upgraded the main drive from a 120GB HDD to a 128GB SSD. However, the performance gain has been minimal. Checking, I have discovered that AHCI is not enabled and nor is there an option to do so in the (up-to-date) BIOS. The HP website lists a compatible 32-bit version (7.6.0.1011 REV: C) of the SATA AHCI driver for this model of laptop. However, despite quoting an identical version (7.6.0.1011 REV: C) the 64-bit version does not list the HP 6910p Notebook PC under its compatible hardware list. Is this simply an oversight or is there a valid reason why the 32-bit version of the driver is compatible whilst the 64-bit is not? You're very welcome, Drambo.

Acer Aspire 3830 Notebook Drivers for Windows 7, Acer Aspire 3830 Notebook Drivers for Windows 7 Download Free Description Driver Download Intel Chipset Mainboard.

I supplied the driver because I figured you were just going to install the driver in IDE mode, reboot and change the SATA Native Mode setting from Disabled to Enabled. Since you changed the SATA Native Mode to Enabled, and then reinstalled W7, you need do nothing else. How can you tell that AHCI is enabled?

Go to the device manager and click on the IDE ATA/ATAPI controller section. There you will find your SATA AHCI controller listed (Intel(R) ICH8M-E/M SATA AHCI Controller).

If the BIOS was not set to AHCI, the controller would have stated it was an ICH8 Serial ATA Controller, or words to that effect. Thanks for clarifying the that setting SATA to native mode enables AHCI. I opted for a fresh Windows 7 install.

Frustratingy the instructions included with the driver only go up to Windows Vista. During the (web enabled) Windows 7 install I didn't witness a prompt to hit F7 to install third-party drivers. However, upon completion and several Windows updates and reboots later I am able to confirm a significanlty improved Windows compatability score for the SSD: up from 5.9 to 7.2. For my own piece of mind I would still like to confirm that AHCI is enabled. I understand I just need to go hunting for the term under the Device Manager. So, that leaves one question: is it still necessary to install the driver supplied in this thread? You're very welcome, Drambo.

Dress Up Rush Serial Key Download. I supplied the driver because I figured you were just going to install the driver in IDE mode, reboot and change the SATA Native Mode setting from Disabled to Enabled. Since you changed the SATA Native Mode to Enabled, and then reinstalled W7, you need do nothing else. How can you tell that AHCI is enabled? Go to the device manager and click on the IDE ATA/ATAPI controller section. There you will find your SATA AHCI controller listed (Intel(R) ICH8M-E/M SATA AHCI Controller). If the BIOS was not set to AHCI, the controller would have stated it was an ICH8 Serial ATA Controller, or words to that effect.